This site is published by Medrecords AI, which makes 1 of the products it covers. We say which one wherever it appears. How we handle that.

AI for QME

The QME AI workflow: 6 compliance gates

By Ahmed Jemaa, Co-Founder and CEO of Medrecords AI. Updated .

Short version: adding AI to a QME file creates 6 gates where the rules apply: before the run, after the run, your read, your checks, your writing and your signature. Pass each gate and log it, and the tool stays an assistant instead of an author.

Limits: Not legal or billing advice. California rules are quoted as read on 2026-11-19 from dir.ca.gov; verify the current text there before you bill, sign or serve, and ask counsel about your case.

The 6 gates on 1 page

Scheduling, forms, service and billing run the same with or without AI, so this page leaves them out. It covers only the points where software changes what the rules ask of you.

6 compliance gates in a QME file that uses AI Gate 1 before the run: BAA in place and record declarations logged. Gate 2 after the run: output treated as excerpts prepared by others. Gate 3 the read: physician reads the records under 8 CCR 41(c)(2). Gate 4 the checks: every relied-on excerpt opened against its page. Gate 5 the writing: summary, discussion and conclusions written by the physician. Gate 6 the signature: disclosure, adapted declarations, report date and file note. Gate 1: before the runBAA signedRecord declarations loggedHIPAA; DWC checklist Gate 2: after the runOutput = excerpts bysomeone else, unverifiedDWC checklist Gate 3: your readRead the records, usingthe index as a map8 CCR 41(c)(2) Gate 4: your checksOpen the page behindevery excerpt you useDWC checklist Gate 5: your writingSummary, discussion,conclusions in your words8 CCR 41(c)(2), (c)(7) Gate 6: your signatureDisclosure, declarations,date, file note8 CCR 41(c)(6)
Figure 1. Gates 3 to 5 are the ones a tool cannot pass for you. Gates 1, 2 and 6 are paperwork, and skipping them is how compliant work ends up looking non-compliant.

Gate 1: before the run

Check: the tool is covered by a signed BAA, the plan you use is the plan the BAA names, and each record batch is logged with its declaration and declared page count. The DWC checklist asks you to confirm declarations are in place before you review records and to address missing ones under 8 CCR 9793(n).

Watch for: uploading a batch with no declaration. Under 9793(n), documents sent without the provider's declaration are not considered available to the physician, and their review cannot be billed. Running them through a tool does not change that.

File note: entries 1 to 3 on the audit trail.

Gate 2: after the run

Check: label the output for what it is. Treat an index, a chronology and a set of excerpts prepared by software the same as excerpts prepared by an assistant: unchecked until you check them.

Watch for: the tool's narrative summary. Many tools produce one by default. Do not paste it into the report; at most use it as a reading guide.

File note: entries 4 and 5.

Gate 3: your read

Check: read the records yourself. 8 CCR 41(c)(2) requires you to review all available relevant medical and non-medical records before writing. The tool's index tells you what is there and in what order; use it to plan, then open the records.

Watch for: treating "relevant" as "what the tool flagged". Tools rank by what they detect. A handwritten note, a poor scan or a record filed under the wrong provider can sit outside their view. Missing-record flags help; they do not prove completeness.

File note: entry 6.

Gate 4: your checks

Check: open the cited page for every excerpt you will rely on in the summary or the opinion. Correct or drop anything that does not match. The DWC checklist says not to rely on another source's summary without checking it against the records.

Watch for: the 3 errors that matter most in a QME file: wrong dates (they move the timeline for causation and P&S), flipped negatives ("denies prior injury" vs "reports prior injury", which changes apportionment) and wrong levels or sides in imaging. Check those first.

File note: entries 7 and 8, as counts and a list of fixes.

Gate 5: your writing

Check: write the record summary, the discussion, the diagnoses and every conclusion yourself. 8 CCR 41(c)(2) and (c)(7) cover these parts. Dictation transcribed by software is fine; text composed by software is not.

Watch for: a tool that offers to draft "from your notes". If your notes are the full reasoning and the tool only formats them, you are closer to transcription. If the tool fills gaps, connects records or proposes apportionment wording, rewrite those parts yourself. The who may write what page sets out the line part by part.

File note: entries 9 and 10.

Gate 6: your signature

Check: add the assistance disclosure, adapt the certification block to what happened, date the report on the day it is ready to sign (8 CCR 41(c)(6)), sign, and serve within the 30 days 8 CCR 38(a) allows. File the note with the report.

Watch for: the "entirely by me" certification line carried over from a template. The declarations page explains the trap and builds a disclosure for your file.

File note: entries 11 and 12.

Supplemental reports

When late records arrive under 8 CCR 35(i) or a party asks for a supplemental report, run the same 6 gates on the new batch. Keep a separate file note for the supplemental, because it is a separate report for 39.5 retention.

Does using AI change the 30-day deadline for a QME report?

No. 8 CCR 38(a) sets 30 days from the exam, with extensions only on Form 112 for the reasons the rule lists. AI can shorten the record work; the deadline stays.

Can staff run the AI tool for me?

Yes. Running software and exporting results is clerical. Gates 3 to 5 stay with you, and if staff prepare excerpts or an outline, name them in the disclosure.