Title: QME AI workflow: 6 gates where the rules apply | AI for QME
URL: https://aiforqme.com/ai-workflow/

> A QME workflow with AI in it, cut to the 6 points where 8 CCR 41 and the DWC checklist apply: what to check at each gate and the note to file.

# The QME AI workflow: 6 compliance gates
By [Ahmed Jemaa](/about/#author), Co-Founder and CEO of Medrecords AI. Updated 2026-11-19.
**Short version:** adding AI to a QME file creates 6 gates where the rules apply: before the run, after the run, your read, your checks, your writing and your signature. Pass each gate and log it, and the tool stays an assistant instead of an author.
**Limits:** Not legal or billing advice. California rules are quoted as read on 2026-11-19 from dir.ca.gov; verify the current text there before you bill, sign or serve, and ask counsel about your case.
## The 6 gates on 1 page
Scheduling, forms, service and billing run the same with or without AI, so this page leaves them out. It covers only the points where software changes what the rules ask of you.
Figure 1. Gates 3 to 5 are the ones a tool cannot pass for you. Gates 1, 2 and 6 are paperwork, and skipping them is how compliant work ends up looking non-compliant.
## Gate 1: before the run
**Check:** the tool is covered by a signed [BAA](/glossary/#baa), the plan you use is the plan the BAA names, and each record batch is logged with its declaration and declared page count. The [DWC](/glossary/#dwc) checklist asks you to confirm declarations are in place before you review records and to address missing ones under 8 CCR 9793(n).
**Watch for:** uploading a batch with no declaration. Under 9793(n), documents sent without the provider's declaration are not considered available to the physician, and their review cannot be billed. Running them through a tool does not change that.
**File note:** entries 1 to 3 on the [audit trail](/audit-trail/).
## Gate 2: after the run
**Check:** label the output for what it is. Treat an index, a chronology and a set of [excerpts](/glossary/#excerpting) prepared by software the same as excerpts prepared by an assistant: unchecked until you check them.
**Watch for:** the tool's narrative summary. Many tools produce one by default. Do not paste it into the report; at most use it as a reading guide.
**File note:** entries 4 and 5.
## Gate 3: your read
**Check:** read the records yourself. 8 CCR 41(c)(2) requires you to review all available relevant medical and non-medical records before writing. The tool's index tells you what is there and in what order; use it to plan, then open the records.
**Watch for:** treating "relevant" as "what the tool flagged". Tools rank by what they detect. A handwritten note, a poor scan or a record filed under the wrong provider can sit outside their view. Missing-record flags help; they do not prove completeness.
**File note:** entry 6.
## Gate 4: your checks
**Check:** open the cited page for every excerpt you will rely on in the summary or the opinion. Correct or drop anything that does not match. The DWC checklist says not to rely on another source's summary without checking it against the records.
**Watch for:** the 3 errors that matter most in a QME file: wrong dates (they move the timeline for causation and P&S), flipped negatives ("denies prior injury" vs "reports prior injury", which changes apportionment) and wrong levels or sides in imaging. Check those first.
**File note:** entries 7 and 8, as counts and a list of fixes.
**Gate 4 is where [page citations](/glossary/#page-citation) save hours.** Medrecords AI cites the source page on every chronology line and answer, so checking an excerpt means opening 1 page, not searching 1,400. It processes a case in about 1 hour.
[Medrecords AI and QME report requirements](https://medrecords.ai/solutions/qme-report-requirements/?src=aiforqme.com)
## Gate 5: your writing
**Check:** write the record summary, the discussion, the diagnoses and every conclusion yourself. 8 CCR 41(c)(2) and (c)(7) cover these parts. Dictation transcribed by software is fine; text composed by software is not.
**Watch for:** a tool that offers to draft "from your notes". If your notes are the full reasoning and the tool only formats them, you are closer to transcription. If the tool fills gaps, connects records or proposes apportionment wording, rewrite those parts yourself. The [who may write what](/who-may-write-what/) page sets out the line part by part.
**File note:** entries 9 and 10.
## Gate 6: your signature
**Check:** add the assistance disclosure, adapt the certification block to what happened, date the report on the day it is ready to sign (8 CCR 41(c)(6)), sign, and serve within the 30 days 8 CCR 38(a) allows. File the note with the report.
**Watch for:** the "entirely by me" certification line carried over from a template. The [declarations page](/declaration-and-attestation/) explains the trap and builds a disclosure for your file.
**File note:** entries 11 and 12.
## Supplemental reports
When late records arrive under 8 CCR 35(i) or a party asks for a supplemental report, run the same 6 gates on the new batch. Keep a separate file note for the supplemental, because it is a separate report for 39.5 retention.
### Does using AI change the 30-day deadline for a QME report?
No. 8 CCR 38(a) sets 30 days from the exam, with extensions only on Form 112 for the reasons the rule lists. AI can shorten the record work; the deadline stays.
### Can staff run the AI tool for me?
Yes. Running software and exporting results is clerical. Gates 3 to 5 stay with you, and if staff prepare excerpts or an outline, name them in the disclosure.
